SP Sprayers

1.5 Acid sprayer

1.5 L ACID
The first industrial hand-held sprayer especially designed for use with acids. Designed to be used with muriatic/hydrochloric, hydrofluoric, or phosphoric acids. This is a reusable sprayer for jobs like staining and etching concrete and masonry, dissolving rust or scale on metal surfaces, and more.

Convenient Features Include:
High density polyethylene tank with UV inhibitors, which is more durable than steel.

  • Industrial spray trigger with spray lock position, allows user to lock trigger while spraying.
  • Seals and O-rings are acid resistant.

From our Testing:

  • 10 Pump Strokes = 16 PSI
  • 20 Pump Strokes = 32 PSI
  • 30 Pump Strokes = 44 PSI

Unit to be used with acid only.

1.5 L Acetone Sprayer

1.5 L Acetone
The first industrial hand-held sprayer especially designed for use with acetone and alcohol. This is a reuseable sprayer for all applications requiring acetone or alcohol, like decorative concrete, graffiti removal, overspray cleanup, etc.

Convenient Features Include:

  • High density polyethylene tank with UV inhibitors, which is more durable than steel.
  • Industrial spray trigger with spray lock position, allows user to lock trigger while spraying.
  • Seals and O-rings are acetone and alcohol resistant.

From our Testing:

  • 10 Pump Strokes = 16 PSI
  • 20 Pump Strokes = 32 PSI
  • 30 Pump Strokes = 44 PSI

Unit to be used with acetone/alcohol only.

SP 10A-&-SP20A Sprayers

The SP10A and SP20A Acid Sprayers are the first industrial sprayers expressly designed for acids - using new acid-resistant plastic and rubber compounds, plastic parts, and a PVC wand.

We have built a sprayer that is not affected by muriatic (hydrochloric) acid, hydrofluoric acid, or phosphoric acids. That means it can be used over and over for jobs like staining or etching concrete and masonry, dissolving rust or scale on metal surfaces, cleaning, degreasing, and more.

As an extra safety measure, the sprayer comes standard with a pressure relief valve that activates at 42 psi to prevent overpressurization and to hand-release any pressure remaining in the tank after use.

The SP Acid Sprayers feature the best-engineered pumping system available, spraying continuously for 10 minutes after a single pumping session. The 12" pump tube builds pressure faster with fewer strokes.

The high-density polyethylene tanks with UV inhibitors are more durable than steel. The units also feature an industrial spray pistol with a spray lock position to allow the user to release the trigger while spraying.

The hose drains from the bottom of the tank, allowing the contents to be completely emptied and eliminating the need for a siphon hose.

SP10ACT & SP35ACT Sprayers

SP10ACT & SP35ACT
The first industrial compression sprayers especially designed for Acetone and Alcohol applications. All materials used are acetone-resistant.

They can be reused over and over for all applications requiring acetone or alcohol, like decorative concrete, graffiti removal, overspray cleanup, etc. As an extra safety measure, the sprayer comes standard with a pressure relief valve that activates at 42 PSI, releasing excessive pressure to prevent over-pressurization. When the job is done, simply pull the valve to release the remaining presssure.

Convenient Features Include:

  • 12" pump tube builds pressure faster with fewer strokes.
  • High density polyethylene tank with UV inhibitors is more durable than steel.
  • Inflating tire valve to pressurize tank with a compressor
  • Industrial spray pistol with spray lock position, lets user lock trigger while spraying
  • 26" brass wand resists acetone attack ad is equipped with anti-drip system which minimized dripping over 95%
  • Seals and O-Rings are acetone/alcohol resistant
  • Hose drains from bottom of tank (no siphon tube), so tank can easily be emptied completely
  • Extra long, flexible 65" hose included
  • Special nozzle & spare parts repair kits are available

Units to be used with acetone/alcohol only.

SP35C Sprayer

SP35C
These hand-held units feature specially formulated high-grade Viton® seals throughout. They are built to handle the aggressive chemicals and rugged field conditions of the construction industry.

The 12" internal pump chamber builds up pressure faster with fewer strokes. The high density polyethylene tank with UV inhibitors is more durable than steel.

An industrial spray piston with on/off lock lets the user release the trigger while spraying. Seals and O-rings are made of high grade NBR.

The hose drains from the bottom of the tank eliminating the need for a siphon tube and allowing the tank to be emptied completely.

The unit also features an extra long heavy gauge 20" brass wand and an extra long 65" chemical hose rated at 300 psi. A steel spring prevents kinking.

There is a convenient wand storage clip on the handle and the wide 4.5" funnel opening makes for easy filling.